Why you Shouldn’t have to Force a Garage Door Shut

 

Garage_door_sliding_up

It is a big problem when your garage door is not closing properly . First of all check garage door properly .  when you didn’t find any problem after checking all the mechanism of garage door or garage  door opener and you shouldn’t have to force garage door for closing it because it damage the mechanism of garage door and problem goes double.

What to do?

You should thoroughly check the garage door and when you didn’t get the solution adjust the closing force of your garage door opener but please don’t put force on garage door for closing because it doubles the problem.

What is garage door opener:

A garage door opener is a motorized device that opens and closes garage doors. Most are controlled by switches on the garage wall, as well as by remote controls carried by the owner.

How garage door openers work :

The garage door dies some time during its 13,476th operation, while it’s being closed. It goes out without much drama—there’s no audible snap as the torsion spring breaks, no parts dangle loose in telltale failure, and the motor sill lights up, strains and stops. Maybe its decline started that day you closed the door on the Buick bumper, or maybe during the last big freeze, when ice swelled the door sections. Or maybe it was just the mechanism’s time. The average American garage door opens and shuts 1500 times a year, and this torsion spring—rated for 10,000 cycles—was positively geriatric in garage-door years. Regardless, you’re in the market for a new system.

There are some step for adjusting the closing force of garage door openers:

 How to adjust the Closing Force for your Garage Door Opener :

  1. A garage door opener with an improperly adjusted closing force can damage the door or worse, injure a child or pet that accidentally walks under the door. The closing force of the door works as a secondary safety catch in the event the optical eyes — that usually stop and open a door if a child, pet or object passes underneath — cease to function. Testing and adjusting the closing force is vital to the safety of the garage door.
  1. There are some steps to figure out the closing force for your garage door opener.
  1. Open the garage door, using the garage door opener.
  1. Close the garage door while holding onto the door handle. The garage door should reverse direction when you apply force to the handle with your hand.
  1. Place a stepladder under the back of the garage door opener’s motor. Climb the ladder. Pull the plastic shroud off the back of the opener and set it aside.
  1. Locate the force-adjustment screw. Turn the screw clockwise one-quarter turn to increase the amount of force required to reverse the door’s direction. Alternatively, turn the screw counterclockwise one-quarter turn to decrease the amount of force required to reverse the door direction. Open and close the garage door. Continue adjusting the closing force until it reverses without excessive force.
  1. Close the garage door. Inspect the rubber seal on the door’s bottom edge. The seal should be slightly compressed and no light should be visible between the bottom of the seal and the garage floor.
  1. Turn the travel adjustment screw — for the closed position — clockwise one-quarter turn to increase the downward travel of the door. Alternatively, turn the screw counterclockwise one-quarter turn to decrease the amount of downward door travel.
  1. Replace the plastic shroud when the garage door operates correctly.

 

To be safe and lower risks, it is best to hire a professional garage door specialist.  The specialist can determine and address the problems of your garage door and propose a feasible solution.  Feel free to contact us any time for help.  Call Yuval at (215) 805-9209 or visit SecureGarages.com – don’t forget our Awesome Amazon Local Deal!  Garage adjustment, reconditioning + safety inspection. and for another $34 we will replace up to 8 rollers!  Mention Code: Secure4Sure10 to get another 10% off your order!

garage coupon

When to use a Wooden Versus a Steel Garage Door

metal-vs-wood-garage-doors

When it comes to replacing or installing a garage door, there are several options to consider. One of the biggest decisions homeowners are faced with when selecting a new garage door is which material will best fit their needs. Wood and steel garage doors are typically the two popular options and there are pros and cons for each. Garage doors are an investment and you want to be sure you are happy with your choice for years to come.

Wood Garage Door Overview

Wood has long been used to build garage doors, and it remains one of the most popular materials, despite the emergence of alternatives such as metal and fiberglass. Wooden garage doors are very common in high-end homes because the look is elegant and refined.

Wooden garage doors are often custom or semi-custom built, meaning they’re not mass-produced in a factory. They can be designed to perfectly match the look and feel of your home. Opt for real wood, or choose a composite variety that mimics real wood but requires less maintenance.

How Much Do Wood Garage Doors Cost?

Factory-built wooden doors start at about $500 to $600, not including installation, while semi-custom doors cost about $1,500 to $3,000. Custom-built wooden doors start at about $3,000 but can easily reach $10,000 or more.

Wood Garage Doors Pros

  • Attractive – Wooden garage doors are widely considered more elegant and luxurious. They look more expensive (largely because they are more expensive).
  • Customizable – With wooden garage doors, the style possibilities are almost endless. Choose from a wide variety of looks, designs and colors. They’re available in standard and non-standard sizes, too.
  • Won’t dent – Wooden doors won’t dent the way steel doors do. A wooden door is less likely to be damaged if you run into it with the lawn mower or one of the neighborhood kids hits it with a baseball.

Wood Garage Doors Cons

  • More expensive – Wooden garage doors are pricier than steel doors. The materials are more expensive, and the fact that they are usually custom or semi-custom built also drives up the price.
  • Require more maintenance – Wood can warp, rot or chip without proper maintenance. At a minimum, you’ll need to sand and stain or repaint wooden garage doors every few years. Excessive moisture and pests such as termites can also lead to damage.

Metal Garage Door Overview

There are several types of metal garage doors, including steel, aluminum and iron. Steel garage doors are by far the most common — this is what most people are talking about when they refer to metal doors.

Steel doors are usually factory-built, meaning they come preassembled. Because of this, the color, design and size options are limited. You won’t find steel garage doors in non-standard sizes.

How Much Do Metal Garage Doors Cost?

Steel garage doors usually sell for anywhere from $400 to $1,200, not including installation. Very basic doors with no windows fall on the low end of that range, while fancier varieties with windows and decorative features fall on the high end. The highest-quality steel doors go for as much as $1,500.

Metal Garage Doors Pros

  • Affordable – Steel garage doors are far less expensive than wooden doors. They’re a great option if you’re on a tight budget.
  • Easier to maintain – You’ll never have to sand, stain or paint metal garage doors. Simply power wash them from time to time to keep them clean.
  • Lighter – Steel garage doors are much lighter in weight than wood doors. They’re easier to install, and they’re easier to open if you don’t have an automatic garage door opener or if the automatic opener breaks.

Metal Garage Doors Cons

  • Prone to rust – Steel garage doors are likely to rust over time. If you live in an extremely moist or coastal climate, they’re probably not the best choice.
  • Prone to dents – Steel garage doors are much more susceptible to dents and dings.
  • Fewer design options – Because steel doors are factory built, the size, design and color options or limited. You won’t be able to customize the garage door to match the style of your home.

Having a wooden door will dramatically improve the curb appeal of your home. A wood garage door can increase the property value of your home as well.  On the other hand, since wood garage doors tend to be on the higher end of the price range, there are now many steel doors that mimic the look of a wooden door that you could also consider if budget is a concern for you.

From an investment standpoint you really can’t beat steel, but when it comes to overall looks, you have to go with wood while you can fabricate the look of wood with faux wood or Steel Clopay carriage style doors, a metal door isn’t going to look as elegant and refined as its wooden counterpart. Steel may have the advantage in maintenance, but you can’t beat wood when it comes to style. But finally choice is yours!

To be safe and lower risks, it is best to hire a professional garage door specialist.  The specialist can determine and address the problems of your garage door and propose a feasible solution.  Feel free to contact us any time for help.  Call Yuval at (215) 805-9209 or visit SecureGarages.com – don’t forget our Awesome Amazon Local Deal!  Garage adjustment, reconditioning + safety inspection. and for another $34 we will replace up to 8 rollers!  Mention Code: Secure4Sure10 to get another 10% off your order!

garage coupon

Why You Should Oil Your Garage Door Tracks Annually

Why-You-Should-Oil-Your-Garage-Door-Tracks-Annually

Oiling the garage door tracks is important because it don’t let the doors to make noise, stops rusting , keeps your garage door rolling smoothly and maintain their real state .

How to Lubricate Springs on Garage Doors:

Keep your garage door rolling smoothly with regular maintenance. The sound of squeaking, squealing, grinding garage doors is annoying, but the sound is a significant sign to a homeowner that the springs maneuvering the action of the garage door require immediate attention. Providing a twice-yearly maintenance routine for garage door springs, whether torsion or extension, addresses problems due to normal wear and tear from the repeated up-and-down motion, checks for any negative affects of seasonal and inclement weather and allows early detection of a defect in the mechanism itself.

What You Need to Know:

Most of the items necessary to lubricate your garage door springs are regular household items, like cotton rags, mild detergent, and lubricating oil (such as WD-40). It’s also helpful to have the owner’s manual to your garage door, if you can locate it.

Lubricating Garage Door Springs:

Step 1:

Apply a thin line of lubricating oil across the top of the torsion springs from one end of the spring to the other. Allow the oil to coat the outside of the springs and seep down between the seams.

Step 2:

Apply a line of lubricating oil across the length of the extension springs. Allow the oil to penetrate the seams of the springs as well as the cables.

Step 3:

Open and close the garage door two to three times once the oil is applied to allow the lubricant to thoroughly coat the inner portion of the springs.

Step 4:

Continue the maintenance regimen by lubricating all hinges, seams, rollers and pivot points that comprise the moving pieces of a garage-door mechanism.

Step 5:

Clean any built-up grease, grime and debris from within the roller tracks using a cloth dipped in a solution of water and detergent. Consult the owner’s manual for instructions regarding whether oil can or cannot be applied to the tracks for your particular model of garage door.

Tips & Warnings :

Lubricate torsion and extension springs once or twice a year and all other moving parts, including hinges and rollers, an additional three times per year.

When oiling torsion or extension springs, do not attempt to fix or adjust problems found during routine maintenance, as broken or faulty springs are dangerous. Consult a professional garage-door repairman to address issues with faulty springs.

Oil used on rollers made with nylon may cause the nylon to degrade. Oil sprayed into the tracks may cause the rollers to slip. Both degrading material and roller slippage affect the effectiveness of the garage-door mechanism.

To be safe and lower risks, it is best to hire a professional garage door specialist.  The specialist can determine and address the problems of your garage door and propose a feasible solution.  Feel free to contact us any time for help.  Call Yuval at (215) 805-9209 or visit SecureGarages.com – don’t forget our Awesome Amazon Local Deal!  Garage adjustment, reconditioning + safety inspection. and for another $34 we will replace up to 8 rollers!  Mention Code: Secure4Sure10 to get another 10% off your order!

amazon